PDA

View Full Version : fuser on km c450 falling apart


Custom Search


chriscctx
09-11-2013, 04:30 PM
This is an on going problem. The lower fuser roller keep shredding (usually just the first three inches of the left side) after aprox 25 - 30% of life. The last 6 have done this.

Just a few notes:

• This has happened on 3 different km c450's
• The source of the fuser has been different each time
• They do not appear to be second life or "re" fused fusers
• The majority of paper being ran through is 20 or 60# - nothing heavy or special by paper standards

Any ideas? This is getting costly and if continues will have to abandon the c450's use all together

JustManuals
09-11-2013, 06:16 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Custom Search