View Full Version : bh_283 paper jamp in the fedar
abbas saeed
09-11-2013, 06:50 PM
How are you all
The problem is that the paper stop in the ADF
http://im33.gulfup.com/aLUFr.jpg
NO 23 is stop paper
http://im33.gulfup.com/7d7Ts.jpg
http://im33.gulfup.com/j26jO.jpg
help me ,,,,,
thank for all
blackcat4866
09-12-2013, 12:56 AM
Lovely photos. It would be really helpful if you were to print off the Management List, than look at the jam codes listed. Don't know how? Consult your manual. =^..^=
JR2ALTA
09-12-2013, 01:17 AM
This series of doc feeders have a angle-shaped sensor on the top cover.
Hard to see at first but it always gets covered in paper dust.
It's always fixed it for me.
There are really no one-ways on this model and the rollers last a long time
wseyller
09-12-2013, 05:16 AM
Need jam codes from jam history in service mode or from a printed list output (management list). Does the leading edge of the paper stop in the same place every time or does it vary. Is the paper damaged at all?
Honestly the pictures you give are no help. You just took pictures of the doc feeder nothing that helps us.
Sent from my Galaxy Nexus using Tapatalk 2
JustManuals
09-12-2013, 03:45 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
zaini
10-31-2013, 03:03 PM
How are you all
The problem is that the paper stop in the ADF
http://im33.gulfup.com/aLUFr.jpg
NO 23 is stop paper
http://im33.gulfup.com/7d7Ts.jpg
http://im33.gulfup.com/j26jO.jpg
help me ,,,,,
thank for all
clean optic sensor at 24
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.