daprex
09-16-2013, 09:12 AM
Hi i have a customer that recently got a new computer with win 8 to wih he has connected the MFP via USB, it does not have a network interface, Ive installed the latest gdi drivers from KM.
The problem is that it only scans in A4 size, regardless what you specify it to grab. if i put an A3 document in the ADF it will scan only the center were an A4 would have been. if I put it on the glass it scans one corner in the size of an A4.
Ive tried different scanning softwares but they all behave the same.
The problem is that it only scans in A4 size, regardless what you specify it to grab. if i put an A3 document in the ADF it will scan only the center were an A4 would have been. if I put it on the glass it scans one corner in the size of an A4.
Ive tried different scanning softwares but they all behave the same.