typesetting
09-21-2013, 12:58 AM
Has anyone ever figured out what causes the error C2454
I have a Bizhub C6500 (http://rd.bizrate.com/rd?t=http%3A%2F%2Fbesttonershop.com%2Fproduct%2FKO NICA%252DMINOLTA%252DBIZHUB%252DPRO%252DC6500%252D TONER%252DMAGENTA%2FA04P331%2F41025%2F%3Futm_sourc e%3Dbizrate%26utm_medium%3Dfeed%26utm_campaign%3Df eed&mid=252397&cat_id=444&prod_id=2720890358&pos=0&rf=af1&b_id=17&bamt=a5fedf14fd8fec0d&ppr=aabbc22e4eeb1385&oid=2720890358&country_code=US&atom=10036&bid_type=0&af_assettype_id=12&af_creative_id=8&af_id=6784)
I never had this problem before my service provider did a 200k PM.
Now this error pops up right away after they replace the black developer unit.
I have had it replaced 3 times.
My service provider is saying it is the humidity of our shop, but it has not been that humid recently.
Today was 80-83 degrees and 62% humid.
I never had this problem and have had this machine at same location since 2011 thru now.
Just recently over this Summer once the PM was done I started getting the error.
Service Provider took machine out and rebuilt and brought back and still getting error after 5-7 days.
Happens quicker if I power off and power on next day.
Can other components like finisher or extra paper tray cause a surge or is this error only cause by the environment?
At wits end, the machine only has a total of 1.85 million click, not even ready for a rebuild.
Please help, in Cleveland OH (216) 440-0403
I have a Bizhub C6500 (http://rd.bizrate.com/rd?t=http%3A%2F%2Fbesttonershop.com%2Fproduct%2FKO NICA%252DMINOLTA%252DBIZHUB%252DPRO%252DC6500%252D TONER%252DMAGENTA%2FA04P331%2F41025%2F%3Futm_sourc e%3Dbizrate%26utm_medium%3Dfeed%26utm_campaign%3Df eed&mid=252397&cat_id=444&prod_id=2720890358&pos=0&rf=af1&b_id=17&bamt=a5fedf14fd8fec0d&ppr=aabbc22e4eeb1385&oid=2720890358&country_code=US&atom=10036&bid_type=0&af_assettype_id=12&af_creative_id=8&af_id=6784)
I never had this problem before my service provider did a 200k PM.
Now this error pops up right away after they replace the black developer unit.
I have had it replaced 3 times.
My service provider is saying it is the humidity of our shop, but it has not been that humid recently.
Today was 80-83 degrees and 62% humid.
I never had this problem and have had this machine at same location since 2011 thru now.
Just recently over this Summer once the PM was done I started getting the error.
Service Provider took machine out and rebuilt and brought back and still getting error after 5-7 days.
Happens quicker if I power off and power on next day.
Can other components like finisher or extra paper tray cause a surge or is this error only cause by the environment?
At wits end, the machine only has a total of 1.85 million click, not even ready for a rebuild.
Please help, in Cleveland OH (216) 440-0403