PDA

View Full Version : Bizhub C7000


Custom Search


Saghir377
09-25-2013, 11:32 AM
good afternoon hope you r all fine thanks for your support.
I found one C7000 dead when i check in DC power supply 2 i found 1 FET K3565 was burn & fuse gone. I replace this FET & fuse 1 day machine work 2nd day again same problem & same FET gone.
Kindly guide me if some body some solution. FET number K3565 in power supply number Q703

JustManuals
09-25-2013, 05:06 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

empiru
09-25-2013, 09:39 PM
I would think that there is some trouble with the "electrical system" at the machine location... maybe you should try plugging the machine into a stabilizer and not directly to the outlet..

technosystems
08-15-2014, 03:55 PM
I would think that there is some trouble with the "electrical system" at the machine location... maybe you should try plugging the machine into a stabilizer and not directly to the outlet..


Dear,
Can i know what are the required load for stabilizer ?

Custom Search