View Full Version : Jamming J 3203
GeorgeK
09-25-2013, 03:40 PM
Any idea much appreciated.
Jams just after page is 'leaving' fuser assy (code J-3203)
All fuser ball bearings have been replaced as well as 3 x fixing drive gear M22T (pn. A03U809311)
Thanks in advance
George
minimerlin
09-25-2013, 07:26 PM
May I suggest that you let us know which model machine you have the problem with..saves me having to find out from your part number!
GeorgeK
09-26-2013, 07:54 AM
May I suggest that you let us know which model machine you have the problem with..saves me having to find out from your part number!
really sorry.
It's a Konica Minolta C6500 !!
GeorgeK
10-12-2013, 06:50 AM
SOLVED
Fuser exit sensor failure. Replaced.
(The one on the chasis, not on the fuser assy !)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.