View Full Version : Miscellaneous Color distance between blue and black others.
Biroprint
10-02-2013, 11:40 AM
22315
Like you can see on circled lines, I have this problem with Konica Minolta C452.
I tried to do Color registration adjustment but it does not help.
The "distance" between colors is increasing as paper goes throught the machine.
Any suggestions?
PeterG
10-02-2013, 11:53 PM
Looks like a print head to me.
Try doing an initialize & stabilize
Possibly reset skew adjustment, but I think you would have to re-enter the data from sticker on the print head.
Try re-seating all 4 of the imaging units, pull them out a bit (2 -3 inches/5 - 8 cm) and firmly push them back in. The image skew and alignment are all referenced off of black.
Also power cycle the machine after resetting the skew adjustment as PeterG suggested.
Biroprint
10-03-2013, 06:59 AM
How do you do "initialize & stabilize" ? Is there any option in menu?
Thank you for you answers. :)
PeterG
10-03-2013, 11:27 PM
I imagine if you don't know how to do that, you are in over your head.
Probably best that you call a KM tech.
I am sure Paul will sell you a service manual. But seriously, if you don't know what you are doing you will do more harm than good.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.