Arcadian
10-11-2013, 03:57 PM
Hello Techs,
22451
I have a 1051 Konica Minolta Having issue with it getting dirty at the edges Ive cleaned everything I could even cleaned out the filters, ozone and imaging filters (blue box) inside the machine, cleaned undercarriage everywhere unless I missed something.
the picture showing is what happens after about 50 sheets, there no dirty prints everything cleaned changed charge unit top and bottom one, even cleaning blade. Im stumped on this one. Any and all help is appreciated.
This picture you can see different in quality, one is printing like line printing the other is printing half tone you can see the half tone one also getting line thru some half tones I am thinking its the support stay unit, which is giving me trouble, but this has recent appeared. I set everything as default and still comes out blotchy pixel wise printing not half tone even when printing from computer.
22452Picture one 22453 picture two
Picture 2 is what I want to achieve while picture one is the machine with the problem. if you look closely you can see the lines in the print out too in picture one.
Im sure it a setting somewhere, just cant put my finger on it, started like two weeks ago. Also have stumped me.
thanks again.
p.s. I have all manuals and parts list.
Arcadian
Thanks again
22451
I have a 1051 Konica Minolta Having issue with it getting dirty at the edges Ive cleaned everything I could even cleaned out the filters, ozone and imaging filters (blue box) inside the machine, cleaned undercarriage everywhere unless I missed something.
the picture showing is what happens after about 50 sheets, there no dirty prints everything cleaned changed charge unit top and bottom one, even cleaning blade. Im stumped on this one. Any and all help is appreciated.
This picture you can see different in quality, one is printing like line printing the other is printing half tone you can see the half tone one also getting line thru some half tones I am thinking its the support stay unit, which is giving me trouble, but this has recent appeared. I set everything as default and still comes out blotchy pixel wise printing not half tone even when printing from computer.
22452Picture one 22453 picture two
Picture 2 is what I want to achieve while picture one is the machine with the problem. if you look closely you can see the lines in the print out too in picture one.
Im sure it a setting somewhere, just cant put my finger on it, started like two weeks ago. Also have stumped me.
thanks again.
p.s. I have all manuals and parts list.
Arcadian
Thanks again