AjitN
10-20-2013, 12:27 PM
While printing job was on, one sticker paper got jammed at fuser assy. Paper was removed by Customer bot machine still shows Paper jammed at area 13. Also bypass tray remains in lift position.
Action taken
checked all sensors and rollers for any paper/piece left.
Cleaned Fuser Assy.
Delete all pending Jobs.
Error reset through bootup utility counter mode.
Check paper jam counter which displayed 9901 code.
All data reset in service mode - system 1 option.
(No change in machine display)
9901 is controller stop due to unmatched paper size.
Any suggestions & thanks in advance
Action taken
checked all sensors and rollers for any paper/piece left.
Cleaned Fuser Assy.
Delete all pending Jobs.
Error reset through bootup utility counter mode.
Check paper jam counter which displayed 9901 code.
All data reset in service mode - system 1 option.
(No change in machine display)
9901 is controller stop due to unmatched paper size.
Any suggestions & thanks in advance