Hello Everyone,
I posted this here because Muratec just came out with their version and figure there is not a lot of Muratec techs. that have come across this. Just became a Muratec Dealer and sold our first Muratec C3680, which is the same unit as the Bizhub C364. The scans through the document feeder are crooked and we have done everything Muratec and the manual offer us to correct this without resolution. We have used the set screw adjustments on the document feeder as far as we can and the documents are still slightly crooked. Muratec says that is all they got, so I have to believe that a Konica Minolta tech. somewhere has to have come across this. Any help would be greatly appreciated!
Vince
I posted this here because Muratec just came out with their version and figure there is not a lot of Muratec techs. that have come across this. Just became a Muratec Dealer and sold our first Muratec C3680, which is the same unit as the Bizhub C364. The scans through the document feeder are crooked and we have done everything Muratec and the manual offer us to correct this without resolution. We have used the set screw adjustments on the document feeder as far as we can and the documents are still slightly crooked. Muratec says that is all they got, so I have to believe that a Konica Minolta tech. somewhere has to have come across this. Any help would be greatly appreciated!
Vince
Comment