PDA

View Full Version : C352-copying problem


Custom Search


eugenionitza
10-24-2013, 09:45 PM
22625When copying by ADF or on glass my copy showsas in the photo.
With an A3 sheet the same issue occurs, onlythere are also horizontal lines.

I tried to caliber the scanner using:
- settinggraduation adjust
- graduation mode
- high compressionmode
- resolution mode.
-
But after printing the pattern test, andtrying for either step (graduation, highcompression,
resolution) to copy it, when scanning, the lamp suddenly stops and then the machine displaysthis
message ‘Scanning test page error’.

An advice would be more than welcomed.

Thank you,
Eugen.

EarthKmTech
10-24-2013, 11:12 PM
looks like the scanner is bent or something seriously wrong is going on with the optical alignment of the mirrors.

has the machine been moved around ?

Naren
10-25-2013, 07:26 PM
open the ADF or Flatten cover then start the copy and watch the scanner movement

emujo
10-25-2013, 08:19 PM
What the hell is a "Flatten Cover"....but seriously, you definitely have either a warped scan bed, or possibly a cable problem on 1 side, If optics look good, then you might want to replace the CCD. Emujo

Custom Search