PDA

View Full Version : Jamming 6501 jamming issue


Custom Search


eifling
11-07-2013, 04:19 PM
Have a 6501 with a jamming issue coming out of trays 4 and 5. The jam code is J-1607. I tricked the door open so that i could watch it run and I can see that the roller right outside of tray 5 never turns. I replaced the clutch on the back side of it. The shaft seems to be find. The brass bushings look fine. Still can not seem to nail this problem down. Anyone have any more ideas?

JustManuals
11-07-2013, 06:04 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


www.justmanuals.com


paul@justmanuals.com

eifling
11-07-2013, 06:41 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:www.justmanuals.compaul@justmanuals.comNo thanks. I get my manuals legally

Mick01
11-07-2013, 11:01 PM
Hi,
Have you tried the clutch in I/O mode?
Check you are getting 24v from the PFU drive board to the clutch.
Hope this helps

Custom Search