PDA

View Full Version : CQ bh c451


Custom Search


jackson007
11-08-2013, 06:30 PM
there is a problem in c451, that in cyan imaging unit developer is reducing in middle of the unit.i relpaced 2 units for testing basis both units the same problem,erasing lamp is litting fine.what else my friends.costomer is not giving me time.so please

JustManuals
11-08-2013, 07:03 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com

paul@justmanuals.com

Blizzoo
11-08-2013, 07:18 PM
Gave you chek and clean the Cyan Prinhead ?

jackson007
11-08-2013, 07:42 PM
Gave you chek and clean the Cyan Prinhead ?yes i cleaned ph unit with cleaning stick

emujo
11-08-2013, 08:47 PM
You need to pull the print head from the MFP and do some basic cleaning....Emujo

blaze2000
11-09-2013, 12:56 AM
yeah man, toner and dev powder can lay on top of the PH. The cleaning wand may not move it all. Pull the IU's and shine your flashlight down through the slit that lets the PH unit hit the drum. Doing so will allow you to physically see if any debris is preventing the proper imaging. Did you replace or at least pull the transfer belt unit to see of maybe the cyan transfer roller is causing the problem? Good luck brother

Custom Search