PDA

View Full Version : Skew problem on c6500


Custom Search


dagoof
11-19-2013, 08:30 PM
Got a 6500 that's suddenly developed a bad skew - it seems to be from all trays. The contact between conveyance rollers at M2 flap wasn't great, so bent the plate back a little to get better contact. Tray Align on the fiery and CD skew adj not helping. Given all other rollers a good clean.

It'd had a couple of bad jams between the PFU and main carriage, I'm guessing there might be some torn paper obstructing, but can't see anything...

JustManuals
11-19-2013, 09:00 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

Custom Search