View Full Version : Kyocera 400ci admin password
jonbonse
11-24-2013, 11:53 AM
Hi
i believe the admin user name and password has been changed and we need to change the IP address of the copier.
Can anyone tell me the default and also how to change it?
Thanks!
zeeeba
11-24-2013, 04:39 PM
try : user: Admin pass: Admin (both case sensitive) or user: 4000 pass: 4000
Eric1968
11-24-2013, 05:16 PM
The default settings are :
On the machine :
Username : 4000
Password : 4000
On the webinterface : admin00
The combination of username Admin and password Admin apply to the 3050ci series.
jonbonse
11-25-2013, 08:34 AM
Thanks
so if these don't work, how do I reset it?
Is there a way in service mode?
copymech
11-25-2013, 01:15 PM
The user or admin password may have been changed. Its a common mistake when setting up access codes for accounting.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.