View Full Version : Lexmark X656dte No Power

Custom Search

11-27-2013, 11:24 AM
Hi All

Just looking for some pointers here on this.

According to the EU there was another "tech" who replaced some parts on machine.

Now it will not power on.

I have not gotten to machine yet to look at it, but was just wanting some ideas as to what to check.

Thanks in advance.


11-27-2013, 04:56 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:



11-29-2013, 03:58 PM
If their is "no power" on bootup I would suspect LVPS. IF there is power but, the screen does not boot or you get an error then I would be looking at the RIP board.

Depends really on what you mean by "no power" :)

What parts were changed?

11-30-2013, 07:10 PM
also keep in mind that u cant use "used or boards from another machine" if u do it will brick the machine, cant remember if it wont boot or will boot with a critical error. would make sure the previous tech used new boards.

Custom Search