PDA

View Full Version : Konica minolta bizhub 282 alert


Custom Search


awad
12-03-2013, 04:00 PM
hi everybody

I have KONICA MINOLTA BIZHUB 282,

After warm-up I tried to copy, then I got this message


!*! ABORT !*!

code = 0x00e00133
taskname = tRT24000
taskid = 0x00005dc0
sp = 0x89f41aa8
ra = 0x81306e18
build-4167. 090520




Then the machine restart again


Please advice

Thank you in advance

JustManuals
12-03-2013, 06:45 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

copier addict
12-03-2013, 07:59 PM
It is most likely the MFBS board. Replace it with a known good one. Don't forget to swap the NVRam when you do this.
Hope this helps

awad
12-03-2013, 08:29 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com


I have the service manual but I did not find any thing about this matter.

regards

Custom Search