Bizhub 163

[zaza]

well bizhub 163 if l started there this machine this error code appeared there C05000....and this machine Extinguished alone....l trying controlled the fusion parts but all is good ...please help

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

[Hansoon]

There is no C05000 in this machine. However C0500 means warm-up failure of fuser unit. Reset by holding the Stop Key down at the same time switch the Power Switch on.

Hans

[tonerspot]

Check the switch for the right door, it is not actuated, on the rear of mashine

[zaza]

well excuse me ...l wrong ..the error code is C0500 ...l know it have warm-up failure ..l trying controlled the fusion section parts ...but it is very good ....please it have any idea to raster this error code how can enter in mode save ??

[Hansoon]

Reset by holding the Stop Key down at the same time switch the Power Switch on.

.....and see what happens if it returns.

Hans

[RWAFA]

You can reset this problem by pressing the following buttons:utility key-stop 00 stop 01 then trouble reset,then do the reset.

[zaza]

hello all ..l informed you l solved my problems ....l taken my finger fix to stop long 5 second l started switch of copiers any all is very good ...thanks very good to all technician help me ...:rolleyes:

[Hansoon]

hello all ..l informed you l solved my problems ....l taken my finger fix to stop long 5 second l started switch of copiers any all is very good ...thanks very good to all technician help me ...:rolleyes:

Just curious to know: Is this a direct translation from Arabic or French through Google Translate or does Zaza have a minor Frimwar problem......

;)

Hans

[zaza]

[QUOTE=Hansoon;392666]Just curious to know: Is this a direct translation from Arabic or French through Google Translate or does Zaza have a minor Frimwar problem......

;)

Hans[/QUOT
what's happend friend hans ...