PDA

View Full Version : Konica 7155 (J32-10)


Custom Search


Maindron1
12-15-2013, 10:41 PM
I wonder if any of you had ever had a j32-10 jam at start-up, I tried a different fusing unit and I still get the same thing. Could it be the ADU board?

Thank for any help.

JustManuals
12-16-2013, 05:09 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

copier addict
12-18-2013, 02:52 PM
There is a black plastic guide in the turn around area with a spring on it. Either the spring has come off, or the guide is broken. The spring is at the back of the guide and so is the part that blocks the sensor.
Hope this helps

Ray G.
12-22-2013, 04:17 PM
I wonder if any of you had ever had a j32-10 jam at start-up, I tried a different fusing unit and I still get the same thing. Could it be the ADU board?

Thank for any help.
Yes, I've had a couple of ADU boards give me that code, but more often than not it's the exit sensor at fault.

Custom Search