PDA

View Full Version : Bizhub 600 jam


Custom Search


pager727
12-31-2013, 08:16 PM
I'm working on a bizhub 600 its giving me 1707, 1102, 1712, and 1704 jam codes. I have rebuilt all the feed units, tried replacing the printer control board, and just put in a whole new paper drive assy (thinking it would replace what ever was bad). Now i have absolutely no idea where to go next.

solidzdawg
01-01-2014, 07:43 PM
Where is the paper stopping at?

There is a bearing behind the bypass that can cause related jams from all main trays that stops it right before the registration section.

The more details you provide the better we can help :D

-Z

JustManuals
01-02-2014, 07:25 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

SmellsHot
01-07-2014, 12:54 PM
There is a one way on the bypass assy that drives conveyance into the conveyance area . And another one way on the gear assy that drives the bypass assy. These usually get toner(located right next to the toner filter) on them and start to slip.

pager727
01-08-2014, 07:59 PM
Where is the paper stopping at?

There is a bearing behind the bypass that can cause related jams from all main trays that stops it right before the registration section.

The more details you provide the better we can help :D

-Z

It does stop right before registration, I found another post that said the same thing. I ordered that!


Thanks!

Custom Search