newrome
01-08-2014, 01:46 AM
Hey Guys,
I haven't posted on here in about forever and I guess my username got cleaned out...
I am looking for a little expert advice...for a 100% Canon user...
I am thinking of picking up a used C352 for home...need the scanner for a project and the office is 5 miles
away and I am too lazy to go back and forth...
Found a C352 for sale that has about 300k clicks and has been serviced regularly...the current complaint on the machine is
that it is producing some dog-eared copies every once in a while...some wrinkles also. I noticed that the
low-power / sleep settings were set to 240min! I am thinking that it is probably the fuser, but did not
visualize any bubbles...Their contracted techs claimed they could not find anything wrong with the machine...blah blah...
only doing the dog-ears 1% of the time...yadda..yadda... I ran it...and from cold it was copying fine.
Anyways...the thing is $500 w/ internal / external finisher.
I am a handy, can pretty much fix anything with a manual and have worked on many lasers, large and small...but haven't serviced a copier.
So you Konica guys...what do you think?
I haven't posted on here in about forever and I guess my username got cleaned out...
I am looking for a little expert advice...for a 100% Canon user...
I am thinking of picking up a used C352 for home...need the scanner for a project and the office is 5 miles
away and I am too lazy to go back and forth...
Found a C352 for sale that has about 300k clicks and has been serviced regularly...the current complaint on the machine is
that it is producing some dog-eared copies every once in a while...some wrinkles also. I noticed that the
low-power / sleep settings were set to 240min! I am thinking that it is probably the fuser, but did not
visualize any bubbles...Their contracted techs claimed they could not find anything wrong with the machine...blah blah...
only doing the dog-ears 1% of the time...yadda..yadda... I ran it...and from cold it was copying fine.
Anyways...the thing is $500 w/ internal / external finisher.
I am a handy, can pretty much fix anything with a manual and have worked on many lasers, large and small...but haven't serviced a copier.
So you Konica guys...what do you think?