View Full Version : Konica Minolta Issue Prinring
junidexy
01-11-2014, 08:16 AM
I have Issue when we printing through the copier, I change the Drum unit, Transfer belt, Still the Problem is same, I attached the image below , please any one help me
Blizzoo
01-11-2014, 10:57 AM
Do you have a good image formation on transfer belt before transfered on paper?What Drum Unit did u changed?there ar 4 and the issue appear on all colors at the same place/feeding direction
JustManuals
01-11-2014, 07:29 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
methogod
01-12-2014, 09:44 AM
stop it before it gets to the fuser make sure the image is good on the paper that is not fused.
Fuser may be torn up, the fuser rollers tare...
Synaux
01-13-2014, 03:47 AM
What model are you running??
gurko_gg
01-13-2014, 08:21 AM
Hello,
did you clean transfer belt with alcohol or etc?
Gürkan.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.