PDA

View Full Version : BizHub 161f


Custom Search


copyman
01-28-2014, 04:56 AM
Customer wanted a back up machine to use primarily for fax machine. I have a low meter 161f, figured I would sell cheap.
Tested in shop and fax worked fine, could hear dial tone.
Got to customer no dial tone. Tried a different cord, still no dial tone

They had a small thermal ribbon machine there that was working fine so I know the cord and jack is good.

The only thing I can think of is they have VoIP. Can this work with VoIP? I have copper lines at my shop.

Thanks for any help

Hansoon
01-28-2014, 07:52 AM
For sure VOIP will not work. I had this issue even with larger machines such as BH-350 with faxkit.

Hans

copyman
01-28-2014, 12:58 PM
Hans,

I figured it might have to do with VoIP. I also had problems with the Biz 200/250/350 faxing over VoIP but it was for issues like not being able to receive but would send fine. There was always a dial tone.

Custom Search