PDA

View Full Version : [Help] c7000 and density balance adj. for all


Custom Search


tinto89
01-29-2014, 10:29 AM
Hi guys!
on c7000 there is a way to adjust the color balance without going to act physically on the distance between the drum and charging unit.
only that the regulation includes the specific paper type, there a way to adjust the machine in general?
I read in the service manual but I did not understand very much :)
DipSW 2 - (5.6) Adjustment of value combination ratio in the density balance adjustment
any of you have got to try?
thanks

JustManuals
01-29-2014, 07:12 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

neil greenhough
03-09-2014, 06:40 PM
There is an application called Colourcare which allows you to print out charts from the machine. Then you follow the manual for colourcare which will then adjust unevenness across all colours. This can then be saved to the machine. The application is on the Fiery disk.

Mick01
03-11-2014, 11:24 PM
Hi,
You can also use XRite Profile Maker 5 software (in demo mode). You will also require an Eye One or Eye Two spectro.
Procedure is outlined in the latest troubleshooting guide.

Custom Search