geemcdoo
02-05-2014, 04:47 PM
Hi Folks
I have a c451 with light print. I've attached the graduation patterns which show issues with the yellow and cyan. The pattern only prints half way on these two colours. Sometimes its less than halfway but always only with these two colours.
I have tried two new IU'S and its the same, i also tried the original units into another machine and they worked fine.
I've replaced a known working transfer belt into the machine as well with no fix.
Any help woud be much appriciated.
Thanks
I have a c451 with light print. I've attached the graduation patterns which show issues with the yellow and cyan. The pattern only prints half way on these two colours. Sometimes its less than halfway but always only with these two colours.
I have tried two new IU'S and its the same, i also tried the original units into another machine and they worked fine.
I've replaced a known working transfer belt into the machine as well with no fix.
Any help woud be much appriciated.
Thanks