BH920 DF-606 Latest Version

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    BH920 DF-606 Latest Version

    Good afternoon, folks.

    Can someone please kindly tell me what's the latest version firmware for the 920's DF-606? I can't seem to find it on the KM's tech site (was it ever there?) and I've got a troubled DF that I could almost bet is firmware related.

    Thanks!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: None
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Re: BH920 DF-606 Latest Version

      Okay, you can ditch this one.

      Problem: Paper would exit (1:1) or stop under the RADF on the reverse section (2:2) with the feeding motor rotating non-stop until you either opened the RADF door or lifted it up, proceeding next to give the corresponding jam code for that action (open door/lifting).

      Cause: Failed skew sensor /Fr. After replacing it, problem is gone.

      Anyway, I got v11 on the RADF, if someone could please confirm to me if it is the latest, I'd be very glad.

      Cheers!
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: BH920 DF-606 Latest Version

          Mr Who...........Didn't we go through this last week or so?

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              Re: BH920 DF-606 Latest Version

              Yup, been there, done that. Finally found out what it was all about.

              Best regards!
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                Previous template Next
                Working...