cokwax
02-06-2014, 07:48 PM
No reset procedure seems to get off the CF023 code from by C451, apart from
(1) Data clear from service mode, or
(2) HDD "Not Installed" setting on service mode.
The funny thing I realised with these MFPs is that HDD must be "Installed" for them to scan to any location.
The machine runs fine when HDD is "Not installed".
Whenever I change it to "Installed," even after formatting, the CF023 reappears. The HDD state confirmation shows that HDD is Ok!
Any ideas?
(1) Data clear from service mode, or
(2) HDD "Not Installed" setting on service mode.
The funny thing I realised with these MFPs is that HDD must be "Installed" for them to scan to any location.
The machine runs fine when HDD is "Not installed".
Whenever I change it to "Installed," even after formatting, the CF023 reappears. The HDD state confirmation shows that HDD is Ok!
Any ideas?