PDA

View Full Version : Error Code Bizhub 950 c 2110 Plz help! :)


Custom Search


solidzdawg
02-11-2014, 09:33 PM
Bizhub 950 pro with 2 million clicks

Upon start up spits this code C2110. It's half way thru a PM.

Replaced transfer wires, then assembly. Then replaced transfer guide motor..

Starting the machine up with ADU unengaged = no code

As soon as ADU lock Lever is engaged and doors are closed, this error appears.

I've followed the suggested replacement list for this error, and now it's pointing to ADU board, or even power. Expansive parts left now...

Any help or ideas would be great, I'm fairly new to working on 950s...

-Z

JustManuals
02-11-2014, 09:44 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

manuelcorrea
02-11-2014, 09:48 PM
remove registration assy. there is a gear that drives trans./sep. motor that needs to be replaced. part no. is 56ua77410. you can also try to turn it a little to where a good part of it engages the motor and it should work

solidzdawg
02-11-2014, 09:53 PM
Thanks for prompt reply and helpful insight.

Ordered that gear, will update tomorrow how it goes.

Thanks a million. I owe you a beer ^_^

methogod
02-12-2014, 09:52 AM
i think you can turn off cleaning. I know you can on the 920s.

Its just a dip switch setting.


when the adu board goes its usually timing that gets goofy.

Custom Search