View Full Version : Miscellaneous Biz 25 Lamp Error
Grunt1775
02-17-2014, 02:44 PM
There is an Image using ADF, No image when using original on glass. Have already replaced CCD, lamp assy, Overall control pwb, scanner pwb, and updated firmware.
mo0651
02-17-2014, 03:30 PM
Does the scanner actually move and lite up, when you scan from glass?
blackcat4866
02-17-2014, 03:33 PM
I didn't see ribbon cable on your list. =^..^=
Grunt1775
02-17-2014, 03:47 PM
Does the scanner actually move and lite up, when you scan from glass?
The scanner will move normally and lite up for the scan.
Grunt1775
02-17-2014, 03:49 PM
I didn't see ribbon cable on your list. =^..^=
No, I did not replace the ribbon cable....will give it a try.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.