View Full Version : sc 50-02 on bh 920
marlon29
02-20-2014, 07:56 AM
hi guys,
anyone encountered the code sc 50-02 on bizhub 920?
We have replaced already the PRCB but it did not correct the problem...
Upon start up, the machine will have an error code without any part/s initializing....
Thanks in advance
Marlon
JustManuals
02-20-2014, 08:28 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
methogod
02-21-2014, 11:18 AM
Error code SC50-02 (bizhub PRO 920) or C-0002 (bizhub PRO 950).
CAUSE: Main body drive serial input abnormality 2 due to failed ADU Driver Board assembly (ADUDB). ICP5 is OPEN (bizhub PRO 920) or ICP17 is OPEN (bizhub PRO 950). Both are for HV2.
SOLUTION: Replace the bizhub PRO 920 ADUDB (p/n 57GA -907 2E) or the bizhub PRO 950 ADUDB (p/n A0Y5 H070 02).
CHECK ICP5 SEE IF ITS OPEN...
I would escalate after that as it does say something about these errors being security related. Not sure what they mean but maybe its worth calling
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.