View Full Version : C-4101 Bizhub 950 Pro
solidzdawg
02-20-2014, 07:40 PM
950 Pro - 2million clicks.
4101 upon initialization, have replaced write assy, and dcps /2
Ordered PRCB and OACB, has anyone fought this error before? Much appreciated :)
-Z
JustManuals
02-20-2014, 07:52 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
blackcat4866
02-20-2014, 07:56 PM
Is the power clean? =^..^=
solidzdawg
02-20-2014, 11:57 PM
Power is clean--On a line conditioner also....
Any other ideas???
-Z
solidzdawg
02-25-2014, 12:13 AM
Update:
Parts tried:
New Write Assy (includes polygon motor drive board and polygon motor)
DCPS /1 , DCPS /2
PRCB
OACB
This machine still codes out upon initialization of Polygon motor speed changing... The polygon motor does not activate..
Any insight would be extremely helpful....
Synaux
02-25-2014, 12:45 AM
I don't have experience with this, but seems to me that you replaced the relevant parts.
My random thoughts:
Thoroughly examine your wiring for shorts, etc.
Check Polygon fan operation.
Maybe AC drive board.
Trouble reset & Firmware?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.