View Full Version : C652 Going dead on Pre drive
Leebs14
02-25-2014, 11:27 AM
Attended a C652 which the customer says went dead on them mid run, removed the paper jam and restarted the machine, it fires up and as soon as it goes into pre-drive it switches off completely. Checked power supply, MFP Board and connections from the Document Feeder etc, but didn't find anything. Any ideas welcome
bizhub1
02-25-2014, 01:17 PM
Attended a C652 which the customer says went dead on them mid run, removed the paper jam and restarted the machine, it fires up and as soon as it goes into pre-drive it switches off completely. Checked power supply, MFP Board and connections from the Document Feeder etc, but didn't find anything. Any ideas welcome
Had one do the same thing and it was the power supply
JustManuals
02-25-2014, 08:42 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
mo0651
02-26-2014, 02:19 PM
any lights on at all after failure? Could be memory chips. Known problem with this series.
Leebs14
03-02-2014, 10:13 AM
UPDATE.. It was the fuser unit, before fitting the new unit, the machine went dead just as pre drive started, fitted new fuser and the machine worked fine, no issues at all and its been almost a week now.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.