If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi. Anybody has this error code before? Has any suggestions to trouble shoot it? The machine is at 379K and the 300K PM has not been done yet. Thank you.
This code relates to low teperature error in the upper fusing belt.
Likely cause is the heater lamp.
Also remember that dip switch 3-1 need to be set to off to clear any fuser codes.
Hope this helps
Comment