PDA

View Full Version : bizhub 601 2nd side missing print on copy


Custom Search


brent
02-27-2014, 06:01 PM
if I didn't see it I wouldn't believe it. its a bizhub 601 first side ok this is a double sided 11 by 17 and when the copies are in the output tray. it is on the underside. I measured it and am submitting a copy for a sample here. it is a quarter there. I measured the area it is 5 and 1/2 by 8 1/2
here is the kicker. it wont do it today. it does it spuratically.. anyone have any thoughts what it might be?

brent24156

SmellsHot
02-28-2014, 11:42 AM
Will this happen on multiple copies? Trying to eliminate scanner section.....
Is this a 4in1? Or is your sample suppose to be the entire page??
I've had similar issues with a bad ICB....blank pages & 1/2 pages.....

brent
02-28-2014, 02:24 PM
Will this happen on multiple copies? Trying to eliminate scanner section.....
Is this a 4in1? Or is your sample suppose to be the entire page??
I've had similar issues with a bad ICB....blank pages & 1/2 pages.....


It it does it on regular paper or 11 by17. That sample was a full 11 by 17 with a full pic
typically it seems to be intermittent. But it happens on multiple copies

WildbillC
02-28-2014, 02:30 PM
This is a copy job not a print job, correct?

brent
02-28-2014, 03:14 PM
Yes it is a copy job. 1 to 2 on the glass. I have not hooked it up as a printer as of yet
thanks for the help
Brent

Custom Search