AB1984
03-04-2014, 08:24 AM
Running a job on 100g bond, and we're getting more jams than we should, jam code 7550. The manual says:
"During operation:
(RU-508)
The entrance sensor (PS1) does not turn ON within a specified period of time."
Which is all well and good, but it doesn't give any advice on what might cause the jam, and how to prevent, any help on getting this job running smoother would be greatly appreciated.
Cheers
"During operation:
(RU-508)
The entrance sensor (PS1) does not turn ON within a specified period of time."
Which is all well and good, but it doesn't give any advice on what might cause the jam, and how to prevent, any help on getting this job running smoother would be greatly appreciated.
Cheers