PDA

View Full Version : C450 adf test chart (DF-601)


Custom Search


Kenzo123
03-05-2014, 08:40 PM
Can anyone help me out whit a Test chart (adf calibration page), my adf decalibrated by itself, in the first time it was cutting @ 2-3 cm from the top of the page , now it cut`s in half...
Thx

Synaux
03-10-2014, 04:43 PM
Can anyone help me out whit a Test chart (adf calibration page), my adf decalibrated by itself, in the first time it was cutting @ 2-3 cm from the top of the page , now it cut`s in half...
Thx

Just adjust it manually...I would be more concerned about why your machine "decalibrated" itself...

emujo
03-10-2014, 07:42 PM
Are you talking about that A4 test chart that comes with every MFP for lead edge, auto zoom etc..? If so I can probably scan and send it to you, but you will have to print it on A4 for it to work properly. Emujo

JustManuals
03-10-2014, 09:29 PM
I've got a file of all kinds of test pages. If I remember I'll post it in the manuals forum.

Here's the link now. I'll also post it in the manuals forum too:

https://www.yousendit.com/download/elNMV0o4Nnk1bmpIRHRVag

Paul@justmanuals.com

Synaux
03-12-2014, 04:10 PM
I've got a file of all kinds of test pages. If I remember I'll post it in the manuals forum.

Here's the link now. I'll also post it in the manuals forum too:

https://www.yousendit.com/download/elNMV0o4Nnk1bmpIRHRVag

Paul@justmanuals.com

Paul, nice collection. :)

emujo, I work on all used machines...if you can scan one for me that would be pretty sweet.

emujo
03-14-2014, 01:40 PM
24399Here you go...

Kenzo123
03-21-2014, 05:50 PM
thanks for everything. problem solved. thanks again

Synaux
04-03-2014, 01:03 AM
Okay, thanks to emujo, I have finally recreated a pdf for printing this.
9J07-9551-00
24616
If anyone wants to take some time and measure an original to confirm my measurements are correct I would appreciate it.

This version is designed to be printed on a 11x17 and cut out to ensure that any printer placement variances are moot.

Outline box is set to A4 (297 x 210mm) for cutting.
Black bars are set to 20mm width for an outside dimension of of 287x190mm.
I reused emujo's scan for the arrows and text on bottom--I believe they are placed where they need to be.

I used my chart on one machine and it worked fairly well.

Custom Search