PDA

View Full Version : Konica Minolta C6000. Creasing lead edge of side 1.


Custom Search


Grantow
03-07-2014, 02:52 PM
Afternoon All.

Has anyone seen this before?
Konica Minolta 6000 creasing lead edge about 10cm in, side one, before fusing. Coated stock 150gsm Satin. Sheet is feed from LCT does this from both tray 4 & 5 and seems to print fine from trays 1-3.

Any help/points would be much appreciated.

24286

Regards,
Grant

Mick01
03-11-2014, 11:21 PM
Hi,
If it is only from tray 4 and 5 check your feed loop settings. Your registration loops may be set too high for those trays.

Custom Search