View Full Version : KM 4030
nmfaxman
03-26-2008, 09:19 PM
Been a while since I worked on Mitas.
Is service mode still 10871087.
I just got a call for pm on a 4030 and want to reset the counter.
Thanks for the help
Yes still the same code
U251
Press the start key. The maintenance count is displayed.
Clearing
1. Press the reset key.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is displayed.
Setting
1. Enter a six-digit count using the numeric keys.
2. Press the start key. The count is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.
/Rune
nmfaxman
03-27-2008, 12:01 AM
That did the trick. Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.