View Full Version : bizhub 500 adjustments don't stick
havokprod
03-17-2014, 08:37 PM
So the problem I've been having is that you'll make adjustments to Lead edge, registration etc and they don't stick. You'll come 20min later and everything is out of wack again. Same thing goes for the ADF. Firmware is the latest and greatest I've replaced the registration unit with a new one with new clutches. Ideas???
-Aldo
Downunder
03-19-2014, 10:11 AM
Sorry for asking but have Have you tried re-doing firmware. Should be 31 for control. As a last resort try swapping NVRM from another BZ500 and see if adjustments hold.
havokprod
03-19-2014, 06:48 PM
I'll try re-doing the firmware and see what happens...
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.