View Full Version : Electrical C-203 (License management error occured) on display screen
Buddy with ACR
03-18-2014, 10:11 PM
You can select OK and the machine will copy, but you can't print. When you select Utililty /Counter key, the first choice selection is missing on the screen. It won't let me set-up printer settings. I tried Data and System Error clear initialization, no help. Can someone help me? Thank you Buddy
habik
03-18-2014, 11:05 PM
You can select OK and the machine will copy, but you can't print. When you select Utililty /Counter key, the first choice selection is missing on the screen. It won't let me set-up printer settings. I tried Data and System Error clear initialization, no help. Can someone help me? Thank you Buddy
NV RAM and Konica Support. Good Luck!
Buddy with ACR
03-18-2014, 11:29 PM
NV RAM and Konica Support. Good Luck!
What does that mean
blackcat4866
03-18-2014, 11:44 PM
Just out of curiosity, which board did you try to swap, that caused the licensing error? =^..^=
copier addict
03-18-2014, 11:59 PM
I have had this problem twice, and both times replacing the EEprom, not the NVRam, solved it.
Hope this helps
Buddy with ACR
03-19-2014, 12:06 AM
Just out of curiosity, which board did you try to swap, that caused the licensing error? =^..^=
The MFP board
Buddy with ACR
03-19-2014, 12:08 AM
I have had this problem twice, and both times replacing the EEprom, not the NVRam, solved it.
Hope this helps
Where and what exactly is the EEprom Thanks
blackcat4866
03-19-2014, 12:29 AM
You'll need participation by the manufacturer to clear the licensing error. There is a clearly defined procedure in the service manual. Start by reading the manual. Then if you are not a Konica Minolta dealer, you should probably involve one to help you clear the licensing error message. The dealer has a website in which they enter encryption codes, then the manufacturer issues a new code to recover your machine.
Parts alone won't help you. You'll need the help of a dealer.
My best advice is to hire out this call to a KM dealer. You'll get nowhere by yourself. =^..^=
copier addict
03-19-2014, 12:40 AM
You'll need participation by the manufacturer to clear the licensing error. There is a clearly defined procedure in the service manual. Start by reading the manual. Then if you are not a Konica Minolta dealer, you should probably involve one to help you clear the licensing error message. The dealer has a website in which they enter encryption codes, then the manufacturer issues a new code to recover your machine.
Parts alone won't help you. You'll need the help of a dealer.
My best advice is to hire out this call to a KM dealer. You'll get nowhere by yourself. =^..^=
I give advice based on my experience with certain issues. I won't say replacing the EEprom will solve Buddy's problem, but, it did solve the two licensing errors I have had. (two different machines).
Buddy;
blackcat is right. Read the manual. If you don't know what, or where the EEprom is, it will help you.
If you don't have a manual then I'm sure Paul at "justsmanuals" will be able to sell you one.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.