PDA

View Full Version : Jamming Bizhub 25E constant adf jam at power on/new install


Custom Search


axdexter
03-21-2014, 03:53 AM
Hello. I am am having trouble with a Bizhub 25E, that has a adf jam that wont clear. I check both ds2, and ds3 and neither one of
them change states. The are both reflective optical sensors, check connections and re-seated everything. All others sensors check out fine.
If I unplug the feeder it power ups normally. It got un-boxed with this problem. Has anyone had any problems with this rebadged muratec?

Thanks for any help

blackcat4866
03-21-2014, 12:01 PM
I think I'd pin-out the cable from the machine to the DF. At least make sure that you're getting all your voltages. =^..^=

wseyller
03-21-2014, 05:32 PM
Some of these sensors you can look at them thru a smart phone camera viewer and you will see a light shine from them if they are powered on.

Sent from my DROID BIONIC using Tapatalk

Custom Search