PDA

View Full Version : Error Code Problem Fiery IC 408 for Konica C6500


Custom Search


chadson
03-21-2014, 10:00 AM
24462

Hi guy

I have one problem need help please

I have reinstalled my Fiery


While running a few days, such issues appear

When i restart Fiery "FF" , At Copie dissapear "Controller"

Please help me.

thank you every one and mode su much

chadson
03-22-2014, 03:56 AM
please help me

Synaux
03-22-2014, 06:36 AM
please help me

First off:
To respond to one's own post with 18 hours in poor taste on just about any forum.

Second:
Give us some more clues.

chadson
03-24-2014, 03:17 AM
helppppppppppppppppp

i was creat a usb boot fiery software......but it not boot........

silviux
03-24-2014, 01:26 PM
helppppppppppppppppp

i was creat a usb boot fiery software......but it not boot........

Change hard disk

costel fasola
03-24-2014, 02:01 PM
Reinstall efi fiery sistem

Albonline
03-24-2014, 10:50 PM
do both of above ff means system not found on hdd if it wont start from jump drive you may need a new motherboard.

chadson
03-26-2014, 11:15 AM
[QUOTE=chadson;409407]24462

so what about this failed

what can i do.....next.........i run a few day.....appear it.......can not print......but connect remote desktop good

please help

Albonline
03-26-2014, 03:18 PM
replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!

chadson
03-27-2014, 04:17 AM
replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!

i was replace hdd new, i install new.....what about ghost.....which ghost i can do?

chadson
03-28-2014, 09:32 AM
hi guy...

where can i get Fiery System software?

thank you every one

Custom Search