View Full Version : Error Code Problem Fiery IC 408 for Konica C6500
chadson
03-21-2014, 10:00 AM
24462
Hi guy
I have one problem need help please
I have reinstalled my Fiery
While running a few days, such issues appear
When i restart Fiery "FF" , At Copie dissapear "Controller"
Please help me.
thank you every one and mode su much
chadson
03-22-2014, 03:56 AM
please help me
Synaux
03-22-2014, 06:36 AM
please help me
First off:
To respond to one's own post with 18 hours in poor taste on just about any forum.
Second:
Give us some more clues.
chadson
03-24-2014, 03:17 AM
helppppppppppppppppp
i was creat a usb boot fiery software......but it not boot........
silviux
03-24-2014, 01:26 PM
helppppppppppppppppp
i was creat a usb boot fiery software......but it not boot........
Change hard disk
costel fasola
03-24-2014, 02:01 PM
Reinstall efi fiery sistem
Albonline
03-24-2014, 10:50 PM
do both of above ff means system not found on hdd if it wont start from jump drive you may need a new motherboard.
chadson
03-26-2014, 11:15 AM
[QUOTE=chadson;409407]24462
so what about this failed
what can i do.....next.........i run a few day.....appear it.......can not print......but connect remote desktop good
please help
Albonline
03-26-2014, 03:18 PM
replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!
chadson
03-27-2014, 04:17 AM
replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!
i was replace hdd new, i install new.....what about ghost.....which ghost i can do?
chadson
03-28-2014, 09:32 AM
hi guy...
where can i get Fiery System software?
thank you every one
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.