PDA

View Full Version : Bizhub C203 error CC172


Custom Search


Wild Bill
03-27-2014, 06:36 PM
I am wanting to know if this is a quick fix or a difficult problem to repair
CC172 Dynamic link error during starting (AP2)

Just doing a favor but i really don't want to get married to this thing; Any solutions or advice appreciated.
I do have the Manual Thanks!

stevena86
03-27-2014, 10:47 PM
Make sure that there is no other controller enabled in the service mode. Service Mode -> System 2 -> Image Controller Setting.

Try flashing the firmware also to the latest version, G20-R6.

Wild Bill
03-28-2014, 04:06 PM
Set to "0" and Bingo :)

Thanks!

Custom Search