PDA

View Full Version : Bizhub Press C1060 Trail edge poor transfer on second side.


Custom Search


Itsthepaper
04-10-2014, 03:17 AM
12pt gloss about 270gsm, only on second side trail edge transfer is poor. Some sheets come out good but most have the issue, anybody run into this? :cool:

marlon29
04-28-2014, 09:55 AM
hi all,

try adjusting the duty cycle on the software switch

RRodgers
04-28-2014, 06:23 PM
Check firmware, i think they just released one to fiz this issue.

prasad
11-13-2015, 10:37 PM
Try this settings:

Lead Edge Erase = 0.
CPM = Down
Thick BK Mode = On
Fusing Air = Max 7
Hard Paper = On

blackcat4866
11-14-2015, 02:16 AM
Is it flip? Heavy glossy media like 270gsm will sometimes curl on the first pass through the fuser. On the second pass the curled trailing edge pulls away from the transfer belt before the image is fully transferred. =^..^=

remati
11-14-2015, 12:26 PM
12pt gloss about 270gsm, only on second side trail edge transfer is poor. Some sheets come out good but most have the issue, anybody run into this? :cool:



you have to adjust the transfer in operator mode

goto the "process adjust" at the tray you have that issue and look to the menu ...go to tranfer adjust TRAIL edge

andyf424
11-16-2015, 03:23 PM
what Remati said..... All my 1060/1070's have had to have this adjustment.

beetle73
10-07-2017, 02:25 PM
Hi
Has anyone successfully resolved this issue?
Thx

Custom Search