View Full Version : Bizhub 920/950/1050 exporters....

Custom Search

04-10-2014, 07:26 PM
I need to add a recyling kit to one of my 920s.

They use the same system as the 1050 and 950...

Its called the RC-501, almost all 1050s have them - if you have "parts only machines" and want to sell a few parts before closing the container doors please contact me.

I have all the directions for removal and i dont need the hoses or hard parts to get to, just the pump/vacuum system. I will buy the rest of it from my dealer as needed.

The 920 does need a special board, if you have new old stock of the RC-501, please let me know.

Any service managers, who don't have any 920/950/1050 left in service and have any of these units please let me know.

Here is more info on the units...

Moved Permanently (http://www.dropbox.com/s/vcyp61hocfdfar7/RC-501InstallInstr.pdf)

Moved Permanently (http://www.dropbox.com/s/ymc8di2t3ky3e9q/RC-501PartsManual.pdf)

basically the 1050's couldn't recycle toner fast enough so you had tons of issues, the RC-501 was a stop gap measure, along with 200 other fixes, then they figured why not adapt it to the 920 and 950 for production shops who run 5% coverage, then 90% coverage, which is what causes the most issues.

Custom Search