patk
04-11-2014, 12:38 PM
I have a bizhub c552 with an FS-527 finisher.
When I set up the PCL driver the " Obtain Device Information" does not find the finisher. I can add it manually and all finisher functions are then available and operational on the machine. But if I then click on "Obtain Device Information" again, the finisher is removed. All of the information is correct in the Obtain Settings and I have turned off Auto.
I get the same problem with the PS driver.
Would be grateful for any suggestions as to why this is happening
Cheers
Pat
When I set up the PCL driver the " Obtain Device Information" does not find the finisher. I can add it manually and all finisher functions are then available and operational on the machine. But if I then click on "Obtain Device Information" again, the finisher is removed. All of the information is correct in the Obtain Settings and I have turned off Auto.
I get the same problem with the PS driver.
Would be grateful for any suggestions as to why this is happening
Cheers
Pat