error code 77-25 for konica minolta bizhub 1050e

[kuatro]

i still did not check which code is this, but it says the error is from finisher intermidiette rolleror or it can be PS33.. i only tried to clean the sensor but still same problem. and im not familiar with the machine also. i need your help guys. anyone please. thanks

[stevena86]

Unfortunately, all you gave us was a jam code, told us you did not look it up and then referenced a sensor that you say you cleaned, but still need our help.

First I'd say look up the jam code and find out where exactly your issue is.

If you need the manual, hit up Paul.

[kuatro]

thanks man