View Full Version : Konica Minolta Parts (Biz hub 20P)
CraiginAK
04-28-2014, 11:32 PM
Wondering about where a good place is to buy Konica Minolta parts specifically for the Biz Hub 20p ? We started taking care of them for a big customer of ours that has about 13 of them. One came up needing fuser and not finding many choices out there for a new fuser.
SmellsHot
04-30-2014, 12:06 PM
The fusers cost more than the printer does.....Kind of a joke really...
JR2ALTA
04-30-2014, 01:08 PM
Clear fuser count in service mode
Hansoon
04-30-2014, 03:21 PM
The fusers cost more than the printer does.....Kind of a joke really...
That whole machine is a bad joke.....
Hans
CraiginAK
04-30-2014, 04:58 PM
Yeah it definitely is way more expensive then it should be. Problem is with one the machines fuser is in bad shape and needs replacement. If it was just a replacement reminder I would definitely just reset the count. I'm thinking replacing the machines as the fuser start going bad might be cheapest solution in long run.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.