If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
When the printer boots display will read "no disks found", the drive is in the machine but I think it has been formatted. There must be a way to load the printers os back on. It is using a 2gig Toshiba 2.5 drive.
I had one with this problem and Hitachi said they stopped suppoting it. The machine works great till you run into a problem that you need tech support. Try calling hytech. I think they have tech support for problems like this. I just upgraded them to a newer machine.
Comment